Other Stuff

Plastic 100 round ammo box from Smartreloader are the best hinged containers for new or reloaded ammunition. Even the first time you open them they will remain opened, and the hinge won't break the first time you open them as many competitors' boxes! Just try them once and you will buy at least a box for every caliber you own. Available for 9mm, 10mm, .38, .40 and .45 calibers.

Plastic rifle ammo box from Smartreloader are the best hinged containers for new or reloaded ammunition. Even the first time you open them they will remain opened, and the hinge won't break the first time you open them as many competitors' boxes! Just try them once and you will buy at least a box for every caliber you own. Available for .223 or .308 calibers.

Plastic ammo box from Smartreloader are the best hinged containers for new or reloaded ammunition. Even the first time you open them they will remain opened, and the hinge won't break the first time you open them as many competitors' boxes! Just try them once and you will buy at least a box for every caliber you own. Available for 9mm, .40 and .45 calibers.

HPA luchtcompressor voor het vullen van uw pcp drukcilinder, paintballgun of persluchtcilinder (<0,5L).  Kan draaien op  een accu van 12V of 110/230V netvoeding. Uiteraard is de compressor het efficientste op netvoeding.

Deze Compressor werkt op zowel 220V als 12V en wordt geleverd met aansluitingen voor beide toevoeren. Het voordeel van deze Compressor is dat de werking super eenvoudig is, dat betekend geen gedoe met water of olie om te koelen. Dit is een grote vooruitgang in het gebruik van kleine compressors. Het vocht uit de lucht van de compressor wordt gefilterd en de filters zijn makkelijk te vervangen.

Je kunt zelf instellen tot hoeveel bar je wilt vullen. De compressor vult tot de ingestelde druk en stopt na het vullen vanzelf. Deze compressor kan cilinders/drukbuizen vullen tot een inhoud van ca. 0,5L met een maximale druk van 300bar. Het vullen van een perslucht cilinder met een gemiddelde inhoud van 0,255 duurt ongeveer 4 minuten wanneer deze helemaal leeg is (1 bar). Meestal schiet je een cilinder niet helemaal leeg, het vullen van een cilinder die tot 100 bar is leeg geschoten gaat dus aanzienlijk sneller, ongeveer 2 a 3 minuten of minder.

Het gebruik van de compressor is buitengewoon makkelijk en wordt geleverd met een duidelijke gebruiksaanwijzing.

Om aan te geven hoe makkelijk het gebruik is hier een kleine omschrijving:

1. Steek de stekker in het stopcontact
2. Druk op FAN om het koelsysteem te activeren
3. Sluit de vulslang aan op de cilinder van uw luchtbuks
4. Draai aan de manometer om de gewenste vuldruk in te stellen
5. Conroleer of het ontluchtingsventiel goed dichtgedraaid zit
6. Druk op START
7. Nadat de gewenste vuldruk bereikt is en de compressor gestopt is met vullen ontlucht je de slang door het ventiel open te draaien.
8. Ontkoppel de luchtbuks

• Stekker 220V
• Klemtangen en stekker voor aansluiting op 12V ACCU
• Vulslang met vochtfilter en twee foster female koppelingen
• Zakje met extra vochtfilters, afdichtingsringen, extra zekeringen en doorslag plaatjes

Standing 30 inches tall and weighing less than 18 pounds, the Predator Shooting Table was designed by shooters. Modeled after a traditional shooting bench rest, the wedge shaped tabletop design provides a comfortable shooting position for either left or right-handed shooters. Once your table is set up, you can lean your rifle into one of the three barrel grooves molded into the sides of the table. Doubling as a maintenance bench, cleaning bench or muzzle loader table at the range, the MTM Predator Shooting Table is ideal for sighting-in and testing firearm performance. It is also ideally suited to the back-forty shooter or the prairie dog hunter on the go.

Quick Release Sling Swivel from CAA.

The Real Avid 1911 Smart Mat is a gun cleaning mat on steroids. It’s perfectly sized (19x16") to handle a field-stripped 1911 with the visible instructions to guide you. The ingenious attached parts tray ensures your pins, bolts and springs are never lost again. And its no-slip backed mat, featuring an oil-resistant surface, allows you to properly clean your gun without ruining the kitchen table. This takes gun mats to the next level.

Clean your favorite handgun wherever you want with the 1911 Smart Mat. This mat offers you a cleaning surface that is large enough to handle a fully disassembled 1911 and instruction printed on the mat to get you there. An oil-resistant surface keeps countertops and kitchen tables protected from chemicals and CLP. The attached parts tray ensures your pins, bolts and springs are never lost again. Makes cleaning a 1911 much easier.

The Real Avid Smart Mat for Glock is a gun cleaning mat on steroids. It’s perfectly sized to handle any field-stripped Glock handgun with the visible instructions to guide you. The ingenious attached parts tray ensures your pins, bolts and springs are never lost again. And its no-slip backed mat, featuring an oil-resistant surface, allows you to properly clean your gun without ruining the kitchen table. This takes gun mats to the next level.

Recover Tactical® 20/20 Stabilizer Kit for Glock. Available in 3 versions.

The 20/20 Stabilizer Kit with Arm Brace is the first truly affordable stabilizer brace kit available on the market. Here’s what’s included in each kit:

• 20/20B – Stabilizer Frame, Brace w/Strap, UCH & GCH17 Charging Handles (low/high profile)
• 20/20S – Stabilizer Frame, Brace w/Strap, UCH & GCH17 Charging Handles (low/high profile), Sling, Picatinny Side Rails
• 20/20H – Stabilizer Frame, Brace w/Strap, UCH & GCH17 Charging Handles (low/high profile), Sling, Picatinny Side Rails, G7 Holster w/Pistol Adapter (Can be used without the 20/20 stabilizer brace)

The perfect cleaning and repair mat for your Springfield Armory XD-M pistol. Have fun and learn while you work on your favorite handgun. The soft top protects your gun from scratches while the neoprene rubber backing protects your work surface from chemicals while keeping everything in place. This isn't your ordinary gun cleaning mat! Show your pride for your firearm while using this high quality neoprene rubber backed and cloth top gun cleaning mat to protect your gun bench, desk, kitchen table, or whatever surface you usually clean or maintain your gun on.

PROTECT YOUR GUN AND WORK AREA

The soft polyester top will ensure your gun doesn't get scratched while the neoprene rubber backing on the mat will keep everything in place and prevent your work surface from sliding around. This mat will also keep harmful chemicals, oil and dirt from penetrating down to your desk, bench or the area where you normally clean and work on your firearms. After the mat begins to accumulate too much dirt, chemicals, or oil just throw it in the wash on a gentle cycle, allow to air dry and it will be virtually like new.

ENTERTAINING AND EDUCATIONAL

With the exploded view drawings and accompanying parts list, making repairs, disassembling your firearm, or basic cleaning can be done much faster and with greater enjoyment. Guns are extremely fascinating and the drawings and data that is printed on each mat will keep you entertained while educating you on how your firearm operates.

DIMENSION

This gun cleaning and parts mat measures 11 inches by 17 inches and is 1/8 of an inch thick.

The perfect cleaning and repair mat for your Springfield Armory XD-S pistol. Have fun and learn while you work on your favorite handgun. The soft top protects your gun from scratches while the neoprene rubber backing protects your work surface from chemicals while keeping everything in place. This isn't your ordinary gun cleaning mat! Show your pride for your firearm while using this high quality neoprene rubber backed and cloth top gun cleaning mat to protect your gun bench, desk, kitchen table, or whatever surface you usually clean or maintain your gun on.

PROTECT YOUR GUN AND WORK AREA

The soft polyester top will ensure your gun doesn't get scratched while the neoprene rubber backing on the mat will keep everything in place and prevent your work surface from sliding around. This mat will also keep harmful chemicals, oil and dirt from penetrating down to your desk, bench or the area where you normally clean and work on your firearms. After the mat begins to accumulate too much dirt, chemicals, or oil just throw it in the wash on a gentle cycle, allow to air dry and it will be virtually like new.

ENTERTAINING AND EDUCATIONAL

With the exploded view drawings and accompanying parts list, making repairs, disassembling your firearm, or basic cleaning can be done much faster and with greater enjoyment. Guns are extremely fascinating and the drawings and data that is printed on each mat will keep you entertained while educating you on how your firearm operates.

DIMENSION

This gun cleaning and parts mat measures 11 inches by 17 inches and is 1/8 of an inch thick.

Convert your H&K USP into an accurate carbine within seconds with this RONI conversion chassis.

Fits USP versions in 9x19mm and .40S&W.

Convert your Sig Sauer P226 pistol into an accurate carbine within seconds with this RONI conversion chassis.

Fits versions in 9x19mm and .40S&W.

CAA Brass Catcher for Roni G2 conversionskits.

Convert your Glock to an accurate assault rifle within seconds with this RONI G2-9 chassis.

Fits Glock 17, 18, 19, 22, 23, 25, 31 and 32.

Convert your Glock to an accurate AR / M4 style assault rifle within seconds with this RONI SBS chassis. Very strong Milspec platform. Not to be confused with the cheap airsoftversions!
 
Fits all Glock 17, 19, 22, 23 and 32 models.

Bill Harsey Designed: Ruger CRKT All-Cylinders Folding knife with locking liner and thumb stud - featuring a black, stonewashed 4.0"10.16 cm drop-point blade; machined G10 handle; unique, "revolver cylinder-style" pivot point; and 2-position clip. Made from 8Cr13MoV Hardness 58-59 HRC Steel. Available in plain or serrated blade.

Bill Harsey Designed: Ruger Go-N-Heavy Compact folding knife with locking liner and thumb stud - featuring a rugged, stonewashed 3.5"8.89 cm drop-point blade; rugged, hard anodized sure grip handles; and a nylon-fabric sheath. Made from 8Cr13MoV Hardness 58-59 HRC Steel. Available in plain or serrated blade.

Ken Steigerwalt Designed: Ruger CRKT Folding knife with locking liner - featuring Outburst® assisted-opening; reliable Fire Safe® blade safety; stonewashed, drop-point 3.50" blade; Ruger American Rifle®-inspired, glass-reinforced Nylon handles; and a clip. Made from 8Cr13MoV Hardness 58-59 HRC Steel. Available with black plain, black serrated edge, stainless plain and stainless serrated edge blade.