Mag Pouches

Butt Stock Belt 6 Rounds

CZ Magazine Pouch Metal Clip

Self-locking universal holder is designated for carrying of broader range of double stack magazines 9mm Luger for the most frequently used service guns used all over the world – such as Glock, SIG Sauer P226/P229, SW MP9, Beretta M9, Taurus 92/99, CZ 75 Compact, Grand Power K100, Walther P99... It enables very fast drawing of the magazine from the holder. The sophisticated design of the fixation spring will be appreciated not only by armed forces members, but also by shooters of action SHOOTING disciplines. This type of holder is equipped with metal clip, which enables its rapid insertion on a belt (without necessity of unbuckling it) or to a tactical vest.

CZ Twin Magazine Pouch Belt Clamp

CZ Double Plastic Magazine Pouch with beltclamp. Both magholders are adjustable for angle.

Created for CZ magazines but works perfectly with Glock magazines aswell.

DAA Alpha-XiP Magazin Pouch with magnet

The DAA Alpha-XiP magazine pouch is a more affordable version of our flag-ship Alpha-Xi pouch. By incorporating an injection-moulded pouch body instead of the CNC machined aluminum and anodized pouch body of the Alpha-Xi, we are able to offer all the same great features at a substantially lower price!

The Polymer used in the pouch body of the Alpha-XiP is a glass-fiber reinforced PA66 material, which is extremely hard and durable. This allows us to  use the same mounting system as used in the aluminum body. Other than the pouch body material itself, the Alpha XiP and Alpha Xi are identical. Both incorporate the same Aluminum ball-joint hanger and include a full set of spacers to support a wide array of magazines.
The Polymer body is not only cheaper than the aluminum option, but it also will not show scratches or wear over time as the aluminum tends to. And while it does not use color inlays as the Alpha-Xi does – it is currently available in 7 striking colors, including Black, Blue, Red, Grey, White, Purple and Orange.

The Alpha XiP pouch body offers 8 connection points to choose from – three height positions each for Right-hand or Left-hand shooters, and two height options for bullets-out mounting. A Key-seat engagement is used in combination with the custom wide-head screw, to prevent any possible wiggle, movement or weakness.

The ball joint is held in the aluminum belt hanger using a pressure coupling with a large T25 Torx M6 Screw. This offers a totally secure lock up and the option to make minute adjustments to the pouch’s angle and tilt.
To further elevate the quality and durability of the product, the Allen screws have all been replaced with T20 and T25 Torx-head screws, and a custom made key which incorporates both these sizes is included.
The Alpha-XiP utilizes the wrap-around spacers, which align all magazine sizes in the center of the pouch body, while fully enveloping them with polymer, to prevent any possible binding and to create the smoothest draw of the magazine.
The spacer system incorporates a height-adjustable bridge support under the magazine, allowing the user to determine how deeply the magazine seats into the pouch.

Three sets of spacers are included as standard with every pouch, to fit all double-stack magazines (excluding the very large Glock/HK .45 mags). A single-stack spacer adaptor is available too and is sold as an accessory.

 

DAA IDPA Magazin Pouch

The unique retention system that all DAA pouches utilize has made the Racer Pouch a very popular choice for competition shooters worldwide. However, to make it suitable for IDPA use, some changes and new features were required. The IDPA Racer Pouch utilizes the same tested and proven Racer Pouch body on an entirely new hanger that allows the slide-onto-belt functionality required for IDPA competitors. The hanger is designed to position the pouch closer to the body, making it suitable for IDPA, but also with an eye to the carry and self-defense markets. The thumb-adjustable wheel is removed to meet the IDPA rules. Tension adjustment is still possible by means of a pressure screw that can be turned with a hex key, accessed from the back of the pouch body. The IDPA Racer Hanger is ideal for threading onto medium to thick belts with a width ranging from 1.5” to 2.25” (39 mm to 57 mm), using a set of included click-in spacers. For each belt width use the appropriate spacers to get a solid and secure fit. Interchangeable pouch inserts allow you to go from larger 2011 mags to smaller CZ/Tan mags. A third pressure spacer is included for Glock and M&P mags. A single stack spacer is also available as an accessory. The pouch is completely ambidextrous, allowing easy mounting for left-handed or right-handed users. You can even mount the pouch at 90 degrees away from the body if you prefer “bullet-out” carry (not legal for IDPA use). You can adjust for tilt in very small steps, allowing you to find your preferred angle. Once the correct angle is set and the center screw tightened, the serrations in the connector piece lock up, preventing any rotation of the pouch until the center screw is loosened several turns. How to remove/replace the spacers to adjust for belt width: If you try to push them out forward or backwards, you will find them almost impossible to remove. The hanger is made of tough material and does not flex much. However, rotating them 90deg makes them come loose very easily. Hold one spacer at a time between you thumb and forefinger and rotate it 90degrees. Then allow it to fall out of the slot. Keep the spare parts safe, should you wish to use them later with a narrower belt. Assemble in the reverse. Available in Black only

DAA Race Master Magazin Pouch

The Race Master Pouch is a completely original design, unlike anything else seen on the market to date.

It is constructed from aluminum rather than plastic, and this allows a design and performance never before possible in a competition mag pouch. It offers a wider and more diverse range of adjustability and mounting options – and more important, locks rock-solid in the chosen position, not losing its settings until the user chooses to change them.

Its wide range of angle adjustments allows the user to position his magazine “just so”. This feature, combined with a unique and superior retention system, creates a smoother and more consistent release, leading to a more reliable and faster reload.

Unlike all other pouches, this pouch’s pressure adjustment wheel applies its load to the back of the magazine, squeezing the mag tube from back to front rather than from left to right, as most others do. This is a lot more effective, as the magazine’s front and back walls are straight and parallel, while the side walls are tapered on all double-stack mags. This type of contact creates a far smoother draw of the magazine. A few turns of the wheel changes the tension from very loose to very tight, as may be required on a particular course of fire.

The side and back inner plastic spacers are specific to the magazine size. Each pouch is delivered with two sets of spacers: one that fits the larger STI type magazines (assembled as default), and one for the slightly smaller CZ/Tan type double-stack mags. A third pressure spacer is included for Glock/M&P mags. A single-stack adapter is available separately as an accessory.

The hanger system of the Race Master Pouch borrows heavily from the excellent features of the Race Master Holster. The inner side of the hanger fits snugly over the shooter’s outer belt, preventing any rocking motion. Since the hanger can be assembled directly in the chosen position, and does not need to slide all along the belt, it can be made with a tighter fit. The minimalist steel plate on the inside of the hanger causes no separation between your inner and outer belt. This is critical, especially when carrying 3 or 4 pouches side by side. The steel plate can be tightened down, to lock the pouch tightly even on thinner, narrower belts.

The cant and tilt of the pouch is achieved by using a ball-socket joint as in the Race Master Holster. The aluminum ball is locked firmly in place with two set-screws. The ball-socket joint is purposely set off-center on the belt hanger, allowing the user to choose between two heights when fitting the pouch to his belt. The ball joint locks into the body of the holster so that it cannot slip or rotate, even if the center screw comes loose. This is a new and very unique feature of this pouch.

Three mounting points on the pouch body allow for ambidextrous use, as well as making it possible to mount the pouch turned 90 degrees away from the body, as preferred by some shooters.

The DAA Race Master Magazine Pouch is suitable for right- or left-handed shooters, for all double-stack magazines, and is available in Black, Silver, Blue, or Red.

Please note that these pouches are made of aluminium. It is to be expected that the steel magazines will scratch and burr the top edges of the pouch over time, however this has no effect on the function of the pouch.
 

Note: Will not fit Large Frame Glock (eg. G20/21) or .45 HK magazines

DAA Racer Magazin Pouch

The DAA Racer Magazine Pouch. A plastic molded version. This pouche borrows heavily from the design of the Race Master Pouch. In fact, we took the very same body design, modified it to suite plastic mounding requirements, while maintaining the exact same unique “pressure from the back” adjustable holding system that has proven so successful. Interchangeable inserts allow you to go from larger 2011 mags to smaller CZ/Tan mags. A third pressure spacer is included for Glock and M&p mags. A single stack spacer is available as an accessory as well. The pouch is completely ambidextrous, allowing easy mounting for left hand or right had users. And you can even mount the pouch at 90deg away from the body, just as you can in the RM version. The belt-hanger of the pouch utilizes the same minimalist steel plate design, which eliminates separation between your inner and outer belt. The belt hanger has been simplified though - there is no ball joint as in the aluminum RM pouch, as that could simply not be realized in plastic in this size. However, the pouch can be adjusted for tilt in very small steps, allowing each shooter to find the right angle for their preference. Once the correct angle is set, and the centre screw tightened, the serrations in the connector piece lock up, preventing any possibility of the pouch rotating until the centre screw is loosened several turns. While these pouches may not offer the unique look and feel of the all aluminum Race Master pouches, or the ball joint tilt base, they are robust and durable, and the performance you can expect is very bit as good as that of it big brother. And with a price tag of a little over half the Race Master pouches, the Racer Pouch will be the prefect choice for many. Note: Will not fit Large Frame Glock (eg. G20/21) or .45 HK magazines

DAA Racer Magnetic Magazin Pouch

DAA Racer magnetic Magazin Pouch for double-stack mags.

It took a while, but DAA finally came up with the perfect solution for attaching a large magnet to the body of the DAA Racer Magazine pouch.

The Racer pouch has a sturdy base, and a center rotation screw which locks firmly and does not come loose or lose its setting. This is what makes it possible to attach the magnet directly to the pouch body with confidence.

To ensure that the screw is held firmly in place, we insert an M5 thermal brass nut into the plastic front panel of the pouch, seating it deeply into the plastic to provide a firm 6mm long thread for the magnet’s screw to attach to. A little manual cleaning on the inside of the pouch ensures that the smooth clean drawing of the magazine from the pouch is not affected in any way.

The magnet, screw and thermal insert nut can also be ordered separately, if you wish to add it to a Racer pouch you already own. A little DIY will be required!

IMI Defense Double Magazine Pouch MP00

IMI Defense Double Magazinepouch for Glock 17/19/22/23/25/26/27/31/32/33/34/35/37/38/39 (Gen. 4 & Gen. 5), Beretta PX4 Storm and H&K P30 / VP9 double-stack magazines. Made from durable polymer. Tension/resintance is adjustable.

IMI Defense Double Magazine Pouch MP01

IMI Defense Double Magazinepouch for all 1911 Single Stack Variants. Made from durable polymer.

Will fit :

• 1911 Single Stack Variants
• Sig Sauer 220
• S&W 4506
• S&W 4516

Features and benefits:

• Comfortable contoured fit
• Fully adjustable for cant
• Rotates 360 degrees for every application (small of back, cross draw)
• Connects to all IMI Defense modular platforms:
Paddle | Belt Loop | Belt Clip | Low Ride Belt Loop | Drop Leg Platform
• Made of durable polymer
• Adjusts with a simple Allen key
• Designed for military & police personnel. Great for civilians & off duty officers

IMI Defense Double Magazine Pouch MP03

IMI Defense MP04 Double Magazinepouch for Beretta PX4 9mm/.40 | H&K P30 | H&K USP FS/Compact 9mm/.40 | Ruger SR9| Steyr M Series| S&W Sigma| Taurus 24/7 | CZ P-07|CZ P-09| CZ 75 Tactical Sports | Walther PPX| Sig Sauer P250 FS / Compact | Sig Sauer P320 FS / Compact 9mm/.40. double-stack magazines. Made from durable polymer. Tension/resintance is adjustable.

IMI Defense Double Magazine Pouch MP04

IMI Defense MP04 Double Magazinepouch for Beretta PX4 9mm/.40 | H&K P30 | H&K USP FS/Compact 9mm/.40 | Ruger SR9| Steyr M Series| S&W Sigma| Taurus 24/7 | CZ P-07|CZ P-09| CZ 75 Tactical Sports | Walther PPX| Sig Sauer P250 FS / Compact | Sig Sauer P320 FS / Compact 9mm/.40. double-stack magazines. Made from durable polymer. Tension/resintance is adjustable.